Venta Línea De Producción Completa - Otros MOST D.o.o. RAKEK MPC-800 Usada 2019 Eslovenia

  • Oferta
    18389759
  • Fecha
    2023-08-21
  • Estado : La oferta fue desactivada.

Producto

Tipo de categoría Línea de Producción Completa
Categoría Board lumber SORTING LINE
Marca MOST d.o.o. RAKEK
Modelo MPC-800

Especificaciones

Condición de la máquina Usada
Fecha de la fabricación 2019
Volumen 1 Convertir
Descripción
BOARD LUMBER SORTING LINE FOR SALE
It was custome-made in 2019, in perfect condition and it includes the following:
1. TILTING DESTACKER – 4 FORKS, 4 TONS
2. LONGITUDINAL BELT CONVEYOR FOR STICKERS
3. TRANSVERSE CHAIN CONVEYOR
4. DRIVEN ROLL CONVEYOR WITH TURNING DEVICE
5. CLASSIC UNDER-TABLE PNEUMATIC CROSSCUT SAW
6. DRIVEN ROLL CONVEYOR WITH TRANSVERSE CHAIN
7. DRIVEN SPIRAL ROLL CONVEYOR
8. ELECTRICAL EQUIPMENT

1. TILTING DESTACKER
Maximal load capacity: 4 tons
Lifting height: cca 1500 mm
Nominal fork height – in horisontal position 320 mm
The length of the supporting forks: 1300 mm
Nuber of the supporting forks: 4 pieces
Internal spacing between supporting forks: 3 x 900 mm
External spacingbetween supoorting forks: 3000 mm
Connection power: 2,2 kW
Angle of inclination: 50 degrees
Lifting and tilting of the stacks is made by the electric motor reducer with a brake.

2. LONGITUDINAL DRIVEN BELT CONVEYOR
Length: 6500 mm
The width of the ribbed belt: 300 mm
Height 400 +- 50 mm
Drive power cca 0,75 kW
Speed - cca 60-80 m/min
1 set

3. TRANSVERSE CHAIN CONVEYOR
Number of chain branches: 5 pieces
Length of the chain branches: cca 2500 mm
Arrangement of the chain branches: adapted
Height: adapted
Speed: adapted cca 20 m/min
Engine power: cca 1,0 kW
It is used for receiving boards from tilting destacker and turning boards if necessary, as well as for the quality control.

4. DRIVEN ROLL CONVEYOR
Length cca 5500 mm
Width (length of the cylinders: cca 1000 mm
Height: cca 900 mm
Speed: 30-60 m/min
Engine power: cca 1,5 kW
Conveyor is used for receiving boards from the transverse chain conveyor

5. CLASSIC UNDER-TABLE PNEUMATIC CROSSCUT SAW WITH LIFTING AND CIRCULAR RECTILINEAR MOVEMENT OF THE CIRCULAR SAW WITH PRESSURE ASSEMBLY TYPE MPC 800
Power of the main engine: 9,2 kW
Diameter of the circular saw: 500 mm
Circular saw bore: 30 mm
Circumferential speed of the circular saw: 75 m/sec
Average time of cutting: approx 2,0-4,0 sec/cutting
Suction connection (2 x) – diameter 100 mm + 160 mm
Compressed air pressure: 600 000 Pa (6 bar)
Compressed air consumption: 24 NI/1. cutting
Exhaust air velocity: 30 m/sek
Working height (H1) 850 0+- 30 mm
Dimensions of the machine: (L x W x H) 940 x2000x1400 mm
Weight of the machine: 950 kg
Maximal panel cut width for
Thickness 25 mm: 800 mm
Thickness 50 mm: 780 mm
Thickness 100 mm: 600 mm
Power on- activation of the cut: two-handed activation
Lifting and movement of the circular saw: CIRCULAR – RECTILINEAR
Press assembly for fixing the plate at the cut
Crosscut saw is used for cross cuting wide boards up to the width 1000 mm

6. DRIVEN ROLL CONVEYOR WITH CROSS DISCHARGE
Length: cca 5500 mm
Width (length of the cylinders) cca 1000 mm
Height: cca 900 mm
Speed: 30-60 m/min
Engine power: cca. 1,5 kW
Conveyor receives boards – squares from the conveyor
Ejection rollers are built into the conveyor, which enable the boards to be ejected to the left side
Pneumatic execution

7. DRIVEN ROLL CONVEYOR WITH CROSS DISCHARGE
Length: cca 5500 mm
Width (length of the cylinders): cca 1000 mm
Height: cca 900 mm
Speed: 30-60 m/min
Engine power: cca 1,5 kW
Conveyor receives boards – squares from the conveqoe
Ejection rollers are built into the conveyor, which enable the boards to be ejected to the left side
Pneumatic execution

8. ELECTRICAL EQUIPMENT FOR DRIVE AND CONTROL
Includes: electrical cabinets with control buttons, necessary electrical switches, photocells, cables with grommets, cable ducts, STAR-STOP buttons for inclusion and other electrical material necessary for functioning of the equipment.

Precio & Condiciones

Precio Por encargo
Vende para: Mundial

Vendedores

Lo sentimos, pero esta oferta ya no está disponible. ¡Pero está bien! Simplemente rellena el siguiente formulario y recibirás decenas de contactos similares y nuevos.

 Confirmo que he leído y entendido la Declaración de Privacidad de Fordaq

Al registrarte aceptas nuestro Aviso legal

Anuncios similares
oferta 23 May 2021 10:23

Heesemann Leif Lorenz Hymmen Rippert Usada

Desde OPTIMALL, s.r.o. Ing. Roman Kurila
oferta 06 Jan 2024 04:00

Usada

Desde Weifang Dening Technology & Trade Co., Ltd.
oferta 14 Jan 2024 04:00

Boshan Usada

Desde Weifang Dening Technology & Trade Co., Ltd.
oferta 03 Mar 2024 04:00

Schneider Usada

Desde Weifang Dening Technology & Trade Co., Ltd.
El Fordaq grado de confiabilidad da una indicación del nivel de confiaza que puede tener con esa compañía La clasificación se basa en la información que tenemos disponible sobre la compañía. Progresivamente estamos expandiendo la clasificación a más compañías así que no se sorprenda si encuentra compañías que no tienen una clasificación

El tipo de información que usamos para elaborar la clasificación:

  • ¿Qué tipo de contato hemos tenido con la compañía?
    N° contactos telefónicos, visitas por nuestro personal, encuentros en ferias.
  • Historial de la actividad de la compañía en Fordaq
  • ¿Tiene la compañía certificados que han sido verificados por Fordaq independientemente?
  • Fordaq verificación si la empresa es miembro de una organización de la industria reconocida (federación, etc)?
  • ¿Ha sido la compañía recomendada por otros miembros?